Monday, July 25, 2011

Locked Versus Nonlocked Plate Fixation For Hallux MTP Arthrodesis

Authors: Kenneth J. Hunt, MD; J. Kent Ellington, MD, MS; Robert B. Anderson, MD; Bruce E. Cohen, MD.


Dorsal plate fixation is used commonly for arthrodesis of the hallux
first metatarsophalangeal (MTP) joint. Custom dorsal plates
incorporating locking technology have been developed recently for
applications in the foot to provide relative ease of application and
theoretically superior mechanical properties. The purpose of this study
is to compare the radiographic and clinical outcomes of patients
undergoing hallux MTP joint arthrodesis using a locked plate, or a
nonlocked plate. Materials and Methods: We compared consecutive
patients who underwent hallux MTP arthrodesis for a variety of
diagnoses with either a precontoured locked titanium dorsal plate
(Group 1) or a precontoured, nonlocked stainless steel plate (Group 2).
All patients were evaluated with radiographs, visual analog pain scale,
American Orthopaedic Foot and Ankle Society (AOFAS) hallux score, and a
detailed patient satisfaction survey. Results: There were 73 feet in
Group 1 and 107 feet in Group 2. There was a trend toward a higher
nonunion rate in Group 1 compared to Group 2. When considering
only patients without rheumatoid arthritis (RA), the union rate was
significantly higher in Group 2 compared to Group 1. Hardware failure
and the overall complication rate was equivalent between the two
Groups. Conclusion: As locked plate technology continues to gain
popularity for procedures in the foot, it is important that clinical
outcomes are reported. Locked titanium plates were associated with
higher nonunion rates. Improved plate design, patient selection, and an
understanding of plate biomechanics in this unique loading environment
may optimize future outcomes for hallux MTP arthrodesis.

Level of Evidence: III, Retrospective Comparative Study

Key Words: Hallux Arthrodesis; Hallux Valgus; Hallux Rigidus; Locked
Plate; Arthritis

Monday, July 18, 2011

Lapidus Arthrodesis with a Single Lag Screw and a Locking H-Plate

Authors:  Christopher R.D. Menke, DPM; Michael C. McGlamry, DPM; Craig A. Camasta, DPM



The aim of this pilot study was to assess if using an interfragmental lag screw and a Darco® locking H-plate for the modified Lapidus arthrodesis in the treatment of hallux abducto valgus deformity (1) would allow for earlier weight bearing than previously described and (2) would indicate whether any changes would occur radiographically with the earlier weight bearing. Twenty-one metatarsocuneiform arthrodeses, in 18 patients, were retrospectively evaluated through chart review and postoperative radiographs. Original diagnoses included painful hallux abducto valgus and osteoarthritis of the first metatarsocuneiform joint. The mean age of the patients was 48 (range, 16 to 70) years. The mean follow-up duration was 38.5 (range, 29 to 60) months. The overall radiographic osseous union rate was 90.5% (19/21 feet), although there were 2 asymptomatic nonunions. There were no cases of fixation failure, and the surgical correction was preserved on follow-up radiographs. Overall, the mean time to full weight bearing was 4.7 (range, 3 to 7.5) weeks, and it was a mean of 8 (range, 7 to 10) weeks before the patient was back to wearing comfortable shoes. The authors concluded that metatarsocuneiform arthrodesis fixated with 1 interfragmentary lag screw and a Darco® locking H-plate provides sufficient stability to allow earlier weight bearing than has been previously described with other internal fixation constructs.
Level of Clinical Evidence: 4

Monday, July 11, 2011

Posterior Approach Using Anterior Ankle Arthrodesis Locking Plate for Tibiotalocalcaneal Arthrodesis

Authors:  Lawrence A. DiDomenico, DPM; Paul Sann, DPM

 

Tibiotalocalcaneal arthrodesis is a successful treatment for patients with severe pain and functional disability in the ankle and subtalar joint. Patients with post-traumatic ankle and subtalar joint arthritis, and/or Charcot deformity, often present with compromised skin and soft tissue structures. In the present report, we describe a technique using an anterior ankle arthrodesis locking plate placed posteriorly to obtain hindfoot and ankle fusion. This technique, which uses the well vascularized, thick, posterior soft tissue envelope, provides very good exposure of the articular surfaces for resection and tibiotalocalcaneal fusion. The technique provides a valuable option for patients with compromised skin and soft tissue structures over aspects of the ankle that make other approaches risky and complicated.

Monday, July 4, 2011

Correction of Moderate to Severe Coronal Plane Deformity with the STAR Ankle Prosthesis

Authors:  Rogor A. Mann, MD; Jeffrey A. Mann; Sudheer C. Reddy







Prior studies have demonstrated a correlation between the degree of
preoperative coronal plane deformity and failure following ankle
replacement. We reviewed all of our patients who underwent ankle
replacement utilizing the STAR prosthesis from 2000 to 2009 to evaluate
the outcome of those with moderate (10 to 19 degrees) and severe (20
degrees or greater) coronal plane deformity. Materials and Methods: Out
of 130 consecutive patients, 43 patients had at least 10 degrees of
preoperative coronal plane deformity. Twenty-five ankles had 10 to 19
degrees degrees of deformity and 18 ankles had 20 degrees
or greater deformity. Average age was 66 years. Average length of
followup was 41 (range, 12 to 98) months. Results: Average talar
preoperative deformity was 17.9 (range, 10 to 29) degrees, while
average initial talar postoperative deformity was 3.5 (range, 0 to 12)
degrees. Average final talar postoperative deformity was 4.7 (range, 0
to 14) degrees. Preoperative and final correction of deformity was
statistically significant (p <0.01), but there was no significant
difference between initial and final postoperative correction. Overall,
recurrence of the preoperative coronal plane deformity occurred in six
of 43 patients (14%). All three patients who had deformities over 25
degrees developed recurrences. Correction of the coronal plane
deformities was achieved by using intraoperative soft-tissue balancing,
including deltoid ligament release in 12 patients
and lateral ligament reconstruction in one patient. Deltoid ligament
release was found to be necessary for all patients with greater than 18
degrees of varus plane deformity. Conclusion: Correction of moderate to
severe coronal plane deformity with the STAR prosthesis was achievable
with only soft-tissue balancing procedures with predictable results
especially for deformities less than 25 degrees.

Level of Evidence: IV, Retrospective Case Series

Key Words: STAR; STAR Ankle; Scandinavian Total Ankle Replacement;
Ankle Replacement; Coronal Plane Deformity; Valgus; Varus; Deltoid
Release

Monday, June 20, 2011

Impaired Wound-Healing, Local Eczema, and Chronic Inflammation Following Titanium Osteosynthesis in a Nickel and Cobalt-Allergic Patient: A Case Report and Review of the Literature

Peter Thomas, MD1; Manfred Thomas, MD2; Burkhard Summer, PhD1; Karin Dietrich, MD1; Melanie Zauzig3; Erwin Steinhauser, PhD3; Veit Krenn, MD4; Hans Arnholdt, MD5; Michael J. Flaig, MD1 


The Journal of Bone & Joint Surgery, Volume 93, Issue 11


Patients known to develop allergic reactions to nickel (Ni), cobalt (Co), or chromium (Cr) often develop eczema in association with items of daily use such as jewelry, earrings, or watchbands. The overall sensitization rates to these metals may range between 1.1% (chromium) and 13% (nickel) in the general population, with further differences based on age and sex1. Chromium-cobalt alloys and stainless steel are widely used as orthopaedic implants and may release nickel, chromium, or cobalt into the surrounding tissues as a consequence of either wear or corrosion2. Some patients with a metal allergy may develop dermatitis in association with orthopaedic implants, and the prevalence of dermal sensitivity in patients with a joint replacement, particularly a failed implant, is higher than that in the general population3. Metal sensitivity rates to nickel, cobalt, or chromium may be as high as 43% in orthopaedic patients with well-functioning implants and as high as 71% in patients with poorly functioning implants3. In contrast, because of their excellent biocompatibility, titanium (Ti)-based materials are not considered to provoke allergic reactions. Our patient developed eczema and impaired wound-healing following the fixation of an ankle fracture with titanium-based implants. Histological analysis of the tissue around the implant demonstrated inflammation primarily with lymphocytes, and a contact allergy to nickel and cobalt was found in the absence of titanium hyperreactivity, raising the question of a prior unknown nickel exposure as the source of the complications. The patient was informed that data concerning this case would be submitted for publication, and she consented.


Investigation performed at the Department of Dermatology and Allergology, Ludwig-Maximilians-University Munich, Munich; the Department of Precision- and Micro-Engineering/Engineering Physics, Munich University of Applied Sciences, Munich; the Department of Foot Surgery, Hessingpark-Clinic, Augsburg; and the Institute of Pathology, Augsburg, Germany

Monday, June 13, 2011

Total Ankle Replacement in the Varus Ankle

Authors:  Shock, R., Christensen, J., Schuberth, J. (2011). 

Reviewed by:  James Johnston, DPM


This is a retrospective study of patients with more than 5º of ankle varus arthrosis who underwent total ankle replacement before October 2007.  Patient preoperative, immediate postoperative and most recent post operative weight bearing films were evaluated.  The degree of varus deformity was determined by measurement of the long axis of the tibia to a perpendicular axis of the talar dome on AP and mortise views.

Results:
A total of 26 patients with preoperative varus ankle deformity of greater than 5 degrees were reviewed in the study.  Patient ages ranged from 63.85 ± 9.33 years, with 7 females and 19 males.  The average follow up was 16.69 ± 7.26 months.  The average varus deformity was 18.3º ± 6.4º on the AP preoperative radiograph and 16.8º ±6.79º on the mortise projection.  The immediate postoperative radiographs were measured and showed correction of 19º on the AP and 17º on mortise projections.  All corrections where within 1º of postoperative films at follow up. There was a significant change in coronal plane correction of varus deformity on both AP and mortise views indicating either one can be used for preoperative planning.  The sequence of corrective maneuvers for varus deformity was:  Ancillary pedal procedures including but not limited to subtalar arthrodesis, ankle ligament reconstruction and talonavicular arthrodesis.  A standard incisional approach was used followed by a medial deltoid sleeve release, lateral gutter resection, talar deformity reduction, tibial-talar preparation, component insertion and lateral ligament placation.

Conclusions:
At the time of review there has been no standard surgical approach to the varus ankle TAA in foot and ankle literature.  This article demonstrates a stepwise approach to management of the rearfoot deformity and presents a convincing although limited case review for the indication of TAR in the varus ankle.  The article points out that the varus ankle deformity frequently involves ligamentous imbalance with leads to a maladaptive joint.  Previous literature has provided us with the suggestion that moderate to severe (10 º to 20 º) coronal plane deformity of the tibiotalar complex may be a contraindication to TAA.  This article argues that with proper soft tissue balancing and the reestablishment of the plantigrade foot with a neutral ankle mortise, success can be found at least in the intermediate follow up.

Monday, June 6, 2011

Functional Outcomes after Fibula Locking Nail for Fragility Fractures of the Ankle

Aysha Rajeev, MBBS, FRCS1, Shanaka Senevirathna, MRCS2Corresponding Author Informationemail address, Sarkhell Radha, MRCS3, N.S. Kashayap, FRCS4


The aim of the present study was to assess the functional outcome of fragility fractures of the ankle treated with a fibular locking nail. A retrospective review of 24 patients with fragility fractures treated with a fibular locking nail from January 2005 to December 2007 was performed. The fibular nail used in our study was Biomet SST (stainless steel taper) small bone locking nail for the fibula. The Olerud and Molander scale was used to assess the functional outcome at the end of 1 year. The domains of the Olerud and Molander scale are pain, stiffness, swelling, stair climbing, running, jumping, squatting, support, and the activities of daily living. The patients were interviewed by telephone or the questionnaire was send by mail. Of the 24 patients, 2 were men and 22 were women. The left side was affected in 15 patients. The age group ranged from 71 to 91 years (average, 79). Of the fractures, 10 were lateral alveolus, 8 were bimalleolar, and 6 were trimalleolar fractures. All the patients were followed up at 6 weeks, 12 weeks, and after 6 months. The average period to fracture union was 8.7 weeks. No wound breakdown or any deep infections developed. The average Olerud and Molander scale score was 57 (range, 30 to 65). The use of fibular locking nails to treat these difficult fracture are quite crucial to achieve early mobilization and also to maintain a good fracture position. In our study, the use of fibular nails was a very useful and successful method of treating fragility fractures with a very low risk of complications. It also helps to restore function and results in patient satisfaction.
Level of Clinical Evidence4


1 Associate Specialist, Trauma and Orthopaedics, Queen Elizabeth Hospital, Gateshead, United Kingdom
2 Junior Clinical Fellow, Trauma and Orthopaedics, Queen Elizabeth Hospital, Gateshead, United Kingdom
3 Senior Clinical Fellow, Trauma and Orthopaedics, Queen Elizabeth Hospital, Gateshead, United Kingdom
4 Consultant Orthopaedic Surgeon, Trauma and Orthopaedics, Queen Elizabeth Hospital, Gateshead, United Kingdom